Common Problems and Solutions of Turning and Milling Compound Lathe
Release time:
2024-01-18
The turning-milling compound lathe is a multi-functional lathe which integrates the functions of lathe and milling machine. When using, you may encounter some common problems. The following are some common problems and solutions of turning and milling composite lathe. 1. The distance between the turning tool and the cutting surface is inconsistent. Solution: check whether the fixture is stable and adjust the fixture, you can reinstall the tool or readjust the height of the lathe. 2. Milling depth is too shallow or too deep. Solution: Adjust the feed speed and tool speed appropriately, change the milling depth, and consider strengthening lubrication and cooling to reduce friction heat.
The turning-milling compound lathe is a multi-functional lathe which integrates the functions of lathe and milling machine. When using, you may encounter some common problems. The following are some common problems and solutions of turning and milling composite lathe.
1. The distance between the turning tool and the cutting surface is inconsistent.
Solution: check whether the fixture is stable and adjust the fixture, you can reinstall the tool or readjust the height of the lathe.
2. Milling depth is too shallow or too deep.
Solution: Adjust the feed speed and tool speed appropriately, change the milling depth, and consider strengthening lubrication and cooling to reduce friction heat.
3, chips pile up.
Solution: Clean up the chips in time, check whether the cutting oil pipeline is unblocked, and ensure sufficient lubrication and cooling.
4, parts processing size deviation is too large.
Solution: First check whether the tool, fixture, and workpiece are correctly positioned and whether they are loose. If necessary, you need to re-clamp the workpiece and adjust the processing parameters, such as cutting speed, feed speed, etc.
5. The machine is unstable or vibrates.
Solution: Check whether the machine parts are loose, such as bed, guide rail, etc., Repair or replace damaged parts. At the same time, it can be considered to reduce the interference of slight vibration and use damping equipment.
6, tool life is short.
Solution: Choose the right tool material and shape, install and use the tool correctly. Reasonably adjust the cutting conditions, avoid excessive cutting, and strengthen lubrication and cooling to extend tool life.
7, the lathe accuracy decreased.
Solution: Regularly check the various indicators of the lathe and perform maintenance, including checking the cleanliness and lubrication of the guide rail and screw, and replacing the worn parts in time to ensure that the lathe is in good working condition.
In short, the problems of turning-milling composite lathes should be found in time and effective measures should be taken to solve them to ensure the normal operation of the lathe and improve production efficiency and processing quality.
Related News
Share